Toyana 6017-2RS deep groove ball bearings

B:72.00 mm; Oil Speed Rating n2:1800 rpm; d:240.000 mm; Grease Speed Rating n1:1400 rpm; Basic Static Radial Load Rating Co:750000 N; D:440.0000 mm; Fillet Radius rb:1.00 mm; Fillet Radius ra:3.00 mm; Basic Dynamic Radial Load Rating C:475000 N;

Reference speed:130 r/min; Calculation factor Y1:3.6; b:22.3 mm; da min.:1284 mm; Calculation factor Y0:3.6; Limiting speed:240 r/min; B:375 mm; Da max.:1716 mm; Fatigue load limit Pu:2320 kN; d:1250 mm;

A1:98.425 mm; J max.:295.275 mm; Cap bolt recommended tightening torque:149.1 N·m; N1:23.813 mm; Labyrinth ring:2 x LOR 188; Initial grease fill:141.75 g; Da:160 mm; PG:1/8 NPT; Ca:49.809 mm; Max. speed for PosiTrac Plus seal:1800 r/min;

Oil Speed Rating Open/Shielded n2:6600 rpm; B:14.00 mm; Basic Static Radial Load Rating Co:28000 N; Fillet Radius ra:1.00 mm; d:70.000 mm; Grease Speed Rating Open/Shielded n1:5400 rpm; Basic Dynamic Radial Load Rating C:31200 N; D:120.0000 mm;

B:21.00 mm; Fillet Radius rb:1.00 mm; D:100.0000 mm; d:55.000 mm; Fillet Radius ra:1.50 mm; Grease Speed Rating n1:5600 rpm; Oil Speed Rating n2:7500 rpm; Basic Dynamic Radial Load Rating C:48800 N; Basic Static Radial Load Rating Co:38000 N;

Ca:57.785 mm; J min.:244.475 mm; Adapter sleeve assembly:SNW 113x2.3/16; L:330.2 mm; Labyrinth ring:2 x LOR 32; Stabilizing ring:SR-16-13; P150°:19.6 kN; A2:134.938 mm; P90°:36 kN; ba:40.481 mm;

d:95.000 mm; Fillet Radius ra:2.00 mm; D:170.0000 mm; Basic Dynamic Radial Load Rating C:108000 N; Grease Speed Rating Open/Shielded n1:3600 rpm; Basic Static Radial Load Rating Co:81500 N; Oil Speed Rating Open/Shielded n2:4300 rpm; Grease Speed Rating n1:3600 rpm; Sealed Speed Rating n3:2400 rpm;

Recommended diameter for attachment bolts, inch G:0.375 in; Limiting speed:4300 r/min; Basic dynamic load rating C:14 kN; d:25.4 mm; Bearing:YAR 205-100-2RF/VE49; B:34.1 mm; L:70 mm; J:99 mm; Thread grub screw G2:1/4-28 UNF; N:12.3 mm;

B4:19 mm; B:45 mm; db min.:102 mm; ra max.:2.5 mm; Basic static load rating C0:490 kN; Calculation factor Y1:2.8; da max.:118 mm; Calculation factor Y0:2.8; D:200 mm; Fatigue load limit Pu:49 kN;

Static (Cor):22.3 mm; Dynamic (Cr):12 mm; with cylindrical bore:670 min-1; Pu:2440 kN; Oil:331.150 kN; d:240 mm; Grease:3920 kN; rs (min):4 mm; with tapered bore:850 min-1; D:440 mm;

da min.:747 mm; Limiting speed:560 r/min; D1 ≈:675 mm; d:670 mm; Basic dynamic load rating C:852 kN; Fatigue load limit Pu:91.5 kN; d1 ≈:795 mm; ra max.:3 mm; Da max.:723 mm; r1,2 min.:4 mm;

Basic Dynamic Radial Load Rating C:19500 N; Dimension S1:22.2 mm; Weight W:0.45 kg; Width A:41.3 mm; Height H:85.7 mm; Insert Bearing IB:ZMaRC; Dimension F:15.9 mm; Shaft Diameter D:30 mm; Dimension L:108.0 mm; Basic Static Radial Load Rating Co:11200 N;

Lock nut:HM 3160; G:Tr 300x4; Hydraulic nut:HMV 60E; B:40 mm; Locking device:MS 3160; B5:53 mm; B1:240 mm; G2:M 6; G3:9 mm; d:300 mm;

Locking device:MS 30/710; B5:112 mm; B:90 mm; A:8 mm; G:Tr 710x7; d3:830 mm; d1:670 mm; Lock nut:HM 30/710; G3:13 mm; B1:286 mm;

d:15 mm; Oil:20 000 min-1; Static (Cor):4.368 kN; a:16 mm; B:11 mm; Pu:0.199 kN; rs (min):0.6 mm; Grease:17 000 min-1; Dynamic (Cr):8.595 kN; D:35 mm;