260 mm x 400 mm x 65 mm KOYO 6052 deep groove ball bearings

Low Torque Specification:No; Basic Dynamic Load Rating(N):10600; Internal Symbol:No; O.D.(Ø):55; Types:No; Size Standards:Metric System; Bearing Style:Rubber Sealed; Width(mm):10; Combination symbol:No; Size Standards:Metric System;

A:38 mm; Designation of bearing:UC209-27G2L4; Designation of housing:FC209-; H3:105; J:132 mm; T max.:100 °C; A2:40.2 mm; G:M6x1; Recommended tightening torque for set screw:8 Nm; N:16mm;

Bearing Used:Deep Groove Ball Bea; RoHS:6; Days to Ship:7 Days; Width T(mm):10; Seals:ZZ (Double Shield); Bearing Used:Deep Groove Ball Bea; Number of Bearings:Single; Number of Bearings:Single; Bearing I.D. d(mm):10; Bearing Part Number:6800;

Seals:VV (Non-Contact Rubb; Shape:Block; Bearing Material:[Steel] Steel; Height H(mm):20 ～ 25; Number of Bearings:Single; RoHS:6; Type:Bearings with Housin; Lateral Width L(mm):64; Number of Bearings:Single; Bearing Used:Deep Groove Ball Bea;

LangID:1; dd min:44; dc min:40; yobi:NJ206ET7; mass:0.207; KBRG:4152; ra:1; DA_:9; D_a max:57; C0:37.5;

Dz:100 mm; N2:49 mm; d:50 mm; C0:23.2 kN; Recommended tightening torque for set screw:22 Nm; H:117 mm; N1:19 mm; B:51.6 mm; Designation of housing:T210N-; N:29mm;

T min.:-20 °C; Dz:54 mm; A1:11 mm; S:17 mm; Z:46.2 mm; J:90 mm; A2:41.5 mm; C:12.8 kN; Designation of housing:FL204N-; N:12mm;

A:31 mm; H:148 mm; T min.:-20 °C; Designation of closed end cover:SCC206; Designation of housing:FL206N-; Weight:1.03 kg; C0:11.2 kN; s1:20.5 mm; L:80 mm; T max.:100 °C;

Inner/Outer Ring Material:Steel; Combination symbol:DB; Contact angle(Degree):30; Outer Ring:With Outer Ring; RoHS:6; Specifications/Environment:Standard; Rolling Element Material:Steel; d:105; Max. Allowed rpm(rpm):2700; Preload:Normal preload;

T:2.5 mm; J1:48.5 mm; d1:44.1 mm; S:9 mm; d:28.58 mm; J:89.2 mm; N:8,7mm; N1:48,5; e:12.1 mm; s1:27.8 mm;

Width(mm):23; Shaft Bore Config.:Cylindrical Bore; Holder Symbol:No; Low Torque Specification:No; Outer Ring Type:Flat; Special Configurations Code:No; Precision (JIS):Grade 0; d:40; Inner/Outer Ring Material:Steel; RoHS:6;

Unit Body Material:Cast Iron; Lubrication:No; Unit, Type:Bearing unit; RoHS:6; Accessory:No Cover; Rolling Element Material:Steel; Diameter series symbol:Used for Light load; Unit Body Material:Cast Iron; Bearing Unit, Type:Pillow Type; Seal Type:Standard;

Seal, Shield Symbols:No; Outer Ring:With Outer Ring; Retainer Type:Resin Forming; Width(mm):24; Bearing Style:Open Type; Symbol of contact angle:C; Precision Grade Symbol:P4; Inner/Outer Ring Material:[Steel] Steel; Type:Angular Contact Ball; Outer Ring:With Outer Ring;

A1:22 mm; Designation of bearing:EX312G2T04; S:31 mm; B1:79.4 mm; A:56 mm; d:60 mm; G:M6x1; T min.:-40 °C; C:81.6 kN; B:61.9 mm;

Bearing Used:Deep Groove Ball Bea; Number of Bearings:Double; Bearing Material:[Steel] Steel; Bearing I.D. d(mm):12; Holder Surface Treatment:Clear Anodize; Seals:ZZ (Double Shield); Bearing Part Number:6801; Flange Shape:Round Type; Number of Bearings:Double; Bearing Retained:No;